CNC-200LN
Specifications
| Capacity | |
| Max. Swing diameter | Ø 562mm |
| Swing over saddle cover | Ø228mm |
| Max. turning diameter | Ø388mm |
| Standard turning diameter | Ø 166mm |
| Max. turning length | Ø628mm |
| Travel | |
| X-axis travel | 228mm |
| Z-axis travel | 628mm |
| Spindle | |
| Max.Speed | 4500rpm |
| Spindle speed (full power output) | 750rpm |
| Spindle motor (Cont./30min.) | 11/15kw |
| Type of spindle nose | A26 |
| Spindle bearing diameter | Ø100mm |
| Spindle bore | Ø65mm |
| Spindle transmission | Belt transmission |
| Spindle drive ratio | 1:1 |
| Turret (Optional) | |
| Type | 8-station (Opt:10-station) |
| OD tool | Ø 25mm |
| ID tool | Ø 32mm |
| Feed Rate | |
| X-axis | 30m/min |
| Z-axis | 30m/min |
| Tailstock | |
| Quill diameter | 75mm |
| Quill taper | MT#4 |
| Travel | 300mm |
| Quill travel | 80mm |
| Motor | |
| Spindle motor | 15HP |
| Feed drive motor | β is8(X, Z axis) |
| Hydraulic motor | 1HP |
| Coolant pump motor | 3/4HP |
| Machine Dimensions | |
| L x W x H | 2600mm x 1600mm x 1500mm |
Standard Accessories
|
|
|
|
|
|
|
|
Optional Accessories
| ￭ FANUC CNC controller |
| ￭ 8” 3-jaw hydraulic hollow chuck with hard and soft jaw (each one set) |
| ￭ 10”3-jaw hydraulic hollow chuck with hard and soft jaw (each one set) |
| ￭ 15”3-jaw hydraulic hollow chuck with hard and soft jaw (each one set) |
| ￭ 10-position turret |
| ￭ 12-position turret |
| ￭ Parts catcher |
| ￭ Tool presetter |
| ￭ Auto door |
| ￭ Liquid/oil separator |
| ￭ Bar feeder |