• 430 Series 1
  • 430 Series

430 Series



  • LA- 430 x 550
  • LA- 430 x 800
  • LA- 430 x 1100
  • LA- 430 x 1700
  • LA- 430 x 2000
Capacity
Width of bed 300 (12”) mm
Total travel of top slide 120 (4 3/4”) mm
Swing over bed Ø432 (17”) mm
Swing over cross slide Ø272 (10 3/4”)mm
Swing in gap Ø610 (24”) mm
Gap width in front of face plate 150 (5 7/8”) mm
Height of center from leg bottom 1080 (42 3/8”) mm
Distance between centers 550 (21.65”) / 800(32") / 1100 (44") /1700 (67") / 2000(78.74")
Headstock
Number of spindle speeds 12 steps
Spindle bore Ø58 (2 1/4”) mm or  Ø80 (opt.)
Type of spindle nose ASA-A1-6 D1-6
Taper of spindle bore& center MT. NO. 6 x No. 4
Range of spindle speeds 35,52,75,110,160,230,330,490,650,950,1350,2000
Thread & Feed
Lead screw diameter and pitch 35(1 1/8”) 4TPI or pitch 6mm
Range of inch threads 2~72(44 changes)
Range of metric threads 6mm: 0.2~14 (39)changes
Number feeds 36 steps
Range of longitudinal feeds 0.03~0.85mm(0.0012”~0.034”)
Range of cross feeds 1/2 of longitudinal feeds
Tailstock                                                  
Tailstock quill diameter Ø60(2 3/8”)
Total travel of tailstock quill 150(6”)
Taper in tailstock quill No. 4
Motors
Spindle drive motor 5 HP/ 7.5HP(opt.)
Coolant pump motor 1/8
Machine Dimensions & Weight  
Space Required ( L x W x H) 1650x1000x1400 2000x1000x1400 2300x1000x1400 2900x1000x1400 3500x1300x1900
Packing Dimensions ( L x W x H ) 1750x1000x1500 2000x1060x1500 2300x1060x1500 2900x1060x1500 3500x1300x1900
Net weight ( approximate ) 1300 1500 1600 1800 2400
Standard Accessories Optional Accessories
3-jaw chuck 9” Follow rest
Center sleeve M.T. No.6 x 4 Fact plate (350mm)
Dead center M.T. No.4 4-position micro carriage stop
Levelling screws Taper turning attachment
Service kits 4-jaw independent chuck
Main motor 5HP(4P) Work light
Steady rest Rear toolpost
Drive plate Splash guard
Complete coolant equipment  
 
 
Back to the top